The 3-jaw chuck is used to hold cylindrical workpieces, allowing the probe to measure or scan around the part without any interference. It can be mounted to a base plate in a verti... Read more
| name | value |
|---|---|
| Adjustable (mm) | 1-63 |
| Centre height (mm) | 38 |
| Clamp type | 3-jaw clamp |
| Fixture type | Chucks |
| Height (mm) | 60.3 |
| Height (in) | 2.37 |
| Length (mm) | 101.6 |
| Length (in) | 4 |
| Measurement system | Multiple |
| Thread | Multiple |
| Through hole diameter (mm) | 6.4 |
| Width (mm) | 73.4 |
| Width (in) | 2.89 |
The 3-jaw chuck is used to hold cylindrical workpieces, allowing the probe to measure or scan around the part without any interference. It can be mounted to a base plate in a vertical or horizontal position. The jaw design allows parts to be clamped from outside or inside the diameter, depending on requirements, and rotated to a marked increment. It accommodates parts of Ø1 mm to Ø63 mm and is recommended for use on CMMs, the Equator™ gauging system, and vision and multi-sensor machines. This is a universal component suitable for thread sizes M4, M6 and ¼-20.
Note: Not intended for checking part runout. Chuck body and jaws are steel.
